Sea and Sea YS02 Strobe Kit wih Velcro is a manual strobe with exceptional cost performance.
Circular beam angle of 100°x100° and guide number of up to 20. The YS-02 is a new compact-type slave strobe that can be used for all applications from wide-angle to macro photography.
You can use the YS-02 as a manual slave strobe with the guide number control function, which can set the light level to any of ten levels. Accurate pictures that follow the photographer's intentions can be taken while the light level is adjusted with the guide number controller. The YS-02 is equipped with a pre-flash cancel mode (*1) that is compatible with a wide range of digital cameras with a pre-flash. Power comes from four AA batteries for a powerful and long-lasting strobe, so you can enjoy taking pictures all day long without having to recharge the batteries. The recycle time takes about two seconds with nickel-metal hydride batteries (2700 mAh) for stress-free continuous shooting.
You can fully exercise your creativity with the YS-02, which can be used as a primary strobe or secondary strobe in a wide range of applications, from compact digital cameras to digital SLR cameras.
*1 Some digital cameras adjust flash levels after a first flash and then capture an image with a second (main) flash. This first flash is called the pre-flash. The strobe’s pre-flash cancel function ignores the pre-flash and synchronizes the strobe with the main flash.
Each Package has a strobe head ,10-Bar 36H arm and slot tray and Sea and Sea cable.Then you choose with or without Sea and Sea Velcro. New Fuji and Olympus Housings dont need velcro as the cable fits into the housing - Most other housings do need the velcro which fixes to the diffuser.
YS-02
Exposure control: Light-level control dial from GN 1 to GN 20 (in 10 increments).
75m depth rating
Guide No. (air) /m: 20 100×100° beam angle (110×110° with supplied diffuser) Colour temp: 5600K (5250K with diffuser)
Digital slave function permits integration into digital camera system via optional fibre-optic cable
Pre-flash control: Equipped with pre-flash cancel mode (ignores one pre-flash)
Power source: 4 × AA cells, Alkaline (6V) or NiMH (4.8V). Full flashes: 230 Alkaline, 330 NiMH (approx.).
Recycle time: 2.5s Alkaline, 1.9s NiMH.
Weight: 505g. Dimensions /mm: 68 x 108 x 129 Supplied accessory: Diffuser, diffuser strap, silicone grease, fixing bolt.
Will my housing be suitable? Click Here
View Video on the benefits of using underwater Strobes
More...
